Vintage Pattern Tin Ceiling Tiles 3D Wall Panels Decor PLM101 Antique tin 10pcs
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
3D Embossed PVC Tin Ceiling Tiles Faux Tin Painting Panel PLM101 Driftwood 10pcs
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
Artistic 3D Ceiling Tile Aged Artwork Panels Decor PLM101 Archaic copper 10pcs
Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area).
PVC Faux Tin Painting Tile Aged Artwork Panels PLM101 Golden 10pcs PAINTSDECOR
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
Vintage Embossed Ceiling Tile 3D Panel PLM101 Rustic copper 10pcs
Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area).
Decorative Fancy Tiles Aged Artwork Panels PLM101 Washed brown 10pcs PAINTSDECOR
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
Ancient Suspended Ceiling Tiles Decorative Wall Panels PLM101 Black gold 10pcs
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
3D Embossed Wall Panels Modern designs Tiles PLM101 White matte 10pcs
Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area).
PVC Ceiling Tile Renovation Geometric PLM101 Washed cyan gold 10pcs PAINTSDECOR
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
15 Sq ft Peel and Stick Wood Vinyl Floor Tiles 10-Pack Waterproof Teak Finish
Easy to install—simply peel and adhere—these DIY-friendly tiles require no complex tools or professional skills. Versatile and stable, they can be used on floors, walls, ceilings, and cabinets with added adhesive for a seamless look.