1 pc Ceramic Tile #23 Pink Blush American Olean Bullnose 6×6 S4669 Thin Set
You are buying 1 piece of 6″ Ceramic Tile Bullnose. Symbol S4669 surface bullnose. Made in USA, from 1950s until it it was discontinued in 1980s. Also have flat tile and other various trim pieces in this color.
Vintage Pattern Tin Ceiling Tiles 3D Wall Panels Decor PLM101 Antique tin 10pcs
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
3D Embossed PVC Tin Ceiling Tiles Faux Tin Painting Panel PLM101 Driftwood 10pcs
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
PVC Faux Tin Painting Tile Aged Artwork Panels PLM101 Golden 10pcs PAINTSDECOR
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
Decorative Fancy Tiles Aged Artwork Panels PLM101 Washed brown 10pcs PAINTSDECOR
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
1 pc. Salt + Pepper / Granite White: 4-3/8″ Glossy Ceramic Tile by Florida Co.
Normal 0 false false false EN-US X-NONE X-NONE Check out my eBay store for more vintage bathroom accessories, I am adding more items daily. I have hundreds of field tiles, mudd-cap tiles, cove base tiles and bull-nose tiles waiting to be listed…If you need ceramic tiles; contact us with your request and I will check to see what we have available…please be specific with exact size, shape & quantity needed. Pictures with other objects can be helpful. location: wood shelf with other FT tiles
Ancient Suspended Ceiling Tiles Decorative Wall Panels PLM101 Black gold 10pcs
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.
Rose Tile Backsplash Nancy Jacey Floral Art Ceramic Mural NJ101
Turn a Plain Space into a Focal Point with a Fine Art Tile Mural! Mural DetailsSizes: refer to Size droplist at top of listingProduced using the highest quality materials and craftsmanshipArtwork baked into the finish resulting in a beautiful productShips unassembledMeasurements do not include grout joint (min 1/16″ per joint)Made in the USA ArtworkArtist: Nancy Jacey Title: A Moment to Celebrate Design #: NJ101 Uses Kitchen BacksplashBehind a stoveIn a showerFramed as art pieceInterior wallsNOT rated for outdoor use Quick Shipping Made to OrderShips within stated time frameIn event of breakage during shipment, replacement tiles provided at no charge Installation Easy installation with grid mapGeneral information provided regarding adhesives, grouts and sealantsClean with multipurpose, non-abrasive cleaner and soft cloth Thank you for taking the time to look at our beautiful tile murals! This high quality mural will create an unbelievable focal point in your home. We can promise you that everyone that sees your new mural will be highly impressed. Our tile murals are individually handcrafted and made to order (produced when ordered), using the highest quality materials and craftsmanship. Our fusion imaging process infuses the artwork into the finish resulting in a beautiful product. Orders typically ship within 3-5 business days (M-F) from receipt of payment.
Pony Tile Backsplash Mikki Senkarik Horse Art Ceramic Mural MSA101
Turn a Plain Space into a Focal Point with a Fine Art Tile Mural! Mural DetailsSizes: refer to Size droplist at top of listingProduced using the highest quality materials and craftsmanshipArtwork baked into the finish resulting in a beautiful productShips unassembledMeasurements do not include grout joint (min 1/16″ per joint)Made in the USA ArtworkArtist: Mikki Senkarik Title: Texas Tony Design #: MSA101 Uses Kitchen BacksplashBehind a stoveIn a showerFramed as art pieceInterior wallsNOT rated for outdoor use Quick Shipping Made to OrderShips within stated time frameIn event of breakage during shipment, replacement tiles provided at no charge Installation Easy installation with grid mapGeneral information provided regarding adhesives, grouts and sealantsClean with multipurpose, non-abrasive cleaner and soft cloth Thank you for taking the time to look at our beautiful tile murals! This high quality mural will create an unbelievable focal point in your home. We can promise you that everyone that sees your new mural will be highly impressed. Our tile murals are individually handcrafted and made to order (produced when ordered), using the highest quality materials and craftsmanship. Our fusion imaging process infuses the artwork into the finish resulting in a beautiful product. Orders typically ship within 3-5 business days (M-F) from receipt of payment.
PVC Ceiling Tile Renovation Geometric PLM101 Washed cyan gold 10pcs PAINTSDECOR
Welcome to my store, we supply all kind of faux tin ceiling tiles. https://stores.ebay.com/faux-tin-ceiling-tiles Faux tin Ceiling Tiles material is PVC(Vinyl).. They come in 600mmx600mm size. Feather-light, easy to install, easy to clean, stain resistant, water resistant, dust free, and easy to cut. Can be installed in the ordinary suspended ceiling.or drop in T-bar grid. or glue up with glue. Faux tin Ceiling tiles are available in many patterns, colors.Main be used kitchen, bathroom, entire home, office, toilet, hotel, memorial or landscape garden, architectural centre piece, shopping centre, store, bar, cafe, restaurant, pub, night club, or retail outlet etc Ceiling panels. These ceiling tiles can be done by DIY(do it yourself).Installation of PVC Glue up Ceiling Tiles directly over the ceiling1. Prepare the surface: Wipe off the ceiling or other surface you are installing the tiles over and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through the light fixture electrical box area)2. Apply the adhesive: Apply any good quality rubber based adhesive (we recommend Contact Cement by DAP (Weldwood Original Formula) to the back of the tile. Let them air untill adhesive solvents evaporates and becomes tacky. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.3. Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet when used on both, the tiles and the ceiling.4. Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges with the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides. Features:Easy to install, drop in or glue upone tile Dimension:600mmx600mmThickness:0.40mm(Because different display device, the tile’s colour would be a bit of difference. hope you can understand.)Per tile weight:200gMaterial: poly vinyl chloride(PVC)One order quantity:10tiles.Delivery time:6-10 work days ShippingI will send your item in 3 days after receiving cleared payment. All will be shipped by Express UPS or FEDEX. it will take 6-12 days normally,Sometimes may delay one more week,as for your Country Customhouse.Return policy100% money refund or free exchange,if you were not pleased with it. Free exchange or resend,if it was damaged or lost on shiping way.